manualshive.com logo in svg

Black Box LE2700A, Руководство пользователя, Страница: 97 / 154

Поделиться
Скачать
Black Box LE2700A Скачать руководство пользователя страница 97

724-746-5500   |   blackbox.com 

Page 97

Chapter 5: Management

Table 5-69. IP Parameters screen options.

Label

Description

IP Protocol Filter

Specifies the IP protocol filter for the ACE  
Any: no IP protocol filter is specified (“don't-care”).  
Specific: if you want to filter a specific IP protocol filter with the ACE, choose this value. A field for  
entering an IP protocol filter appears.  
ICMP: selects ICMP to filter IPv4 ICMP protocol frames. Extra fields for defining ICMP parameters will 
appear. For more details of these fields, please refer to the help file.  
UDP: selects UDP to filter IPv4 UDP protocol frames. Extra fields for defining UDP parameters will appear. 
For more details of these fields, please refer to the help file. 
TCP: selects TCP to filter IPv4 TCP protocol frames. Extra fields for defining TCP parameters will appear. 
For more details of these fields, please refer to the help file.

IP Protocol Value  Specific allows you to enter a specific value. The allowed range is 0 to 255. Frames matching the ACE 

will use this IP protocol value.

IP TTL

Specifies the time-to-live settings for the ACE  
Zero: IPv4 frames with a time-to-live value greater than zero must not be able to match this entry.  
Non-zero: IPv4 frames with a time-to-live field greater than zero must be able to match this entry.  
Any: any value is allowed (“don't-care”).

IP Fragment

Specifies the fragment offset settings for the ACE. This includes settings of More Fragments (MF) bit and 
Fragment Offset (FRAG OFFSET) for an IPv4 frame.  
No: IPv4 frames whose MF bit is set or the FRAG OFFSET field is greater than zero must not be able to 
match this entry.  
Yes: IPv4 frames whose MF bit is set or the FRAG OFFSET field is greater than zero must be able to 
match this entry.  
Any: any value is allowed (“don't-care”).

IP Option

Specifies the options flag settings for the ACE  
No: IPv4 frames whose options flag is set must not be able to match this entry.  
Yes: IPv4 frames whose options flag is set must be able to match this entry.  
Any: any value is allowed (“don't-care”).

SIP Filter

Specifies the source IP filter for this ACE  
Any: no source IP filter is specified (Source IP filter is “don't-care”).  
Host: source IP filter is set to Host. Specify the source IP address in the SIP Address field that appears.  
Network: source IP filter is set to Network. Specify the source IP address and source IP mask in the SIP 
Address and SIP Mask fields that appear.

SIP Address

When Host or Network is selected for the source IP filter, you can enter a specific SIP address in dotted 
decimal notation.

SIP Mask

When Network is selected for the source IP filter, you can enter a specific SIP mask in dotted decimal 
notation.

DIP Filter

Specifies the destination IP filter for the ACE  
Any: no destination IP filter is specified (destination IP filter is “don't-care”). 
Host: destination IP filter is set to Host. Specify the destination IP address in the DIP Address field that 
appears.  
Network: destination IP filter is set to Network. Specify the destination IP address and destination IP 
mask in the DIP Address and DIP Mask fields that appear.

DIP Address

When Host or Network is selected for the destination IP filter, you can enter a specific DIP address in 
dotted decimal notation.

DIP Mask

When Network is selected for the destination IP filter, you can enter a specific DIP mask in dotted  
decimal notation.

 

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов