Black Box LE2700A, Руководство пользователя, Страница: 95 / 154

724-746-5500 | blackbox.com
Page 95
Chapter 5: Management
Table 5-66 (continued). ACE Configuration screen.
Label Description
Rate Limiter Specifies the rate limiter in number of base units. The allowed range is 1 to 15. Disabled means
the rate limiter operation is disabled.
Port Copy Frames matching the ACE are copied to the port number specified here. The allowed range is the
same as the switch port number range. Disabled means the port copy operation is disabled.
Logging Specifies the logging operation of the ACE. The allowed values are:
Enabled: frames matching the ACE are stored in the system log.
Disabled: frames matching the ACE are not logged.
NOTE: System log memory capacity and logging rate is limited.
Shutdown Specifies the shutdown operation of the ACE. The allowed values are:
Enabled: if a frame matches the ACE, the ingress port will be disabled.
Disabled: port shutdown is disabled for the ACE.
Counter Indicates the number of times the ACE matched by a frame.
Figure 5-87. MAC Parameters screen.
Table 5-67. MAC Parameters screen options.
Label Description
SMAC Filter (Only displayed when the frame type is Ethernet Type or ARP.)
Specifies the source MAC filter for the ACE.
Any: no SMAC filter is specified (SMAC filter status is “don't-care”).
Specific: if you want to filter a specific source MAC address with the ACE, choose this value. A
field for entering an SMAC value appears.
SMAC Value When Specific is selected for the SMAC filter, you can enter a specific source MAC address. The
legal format is "xx-xx-xx-xx-xx-xx". Frames matching the ACE will use this SMAC value.
DMAC Filter Specifies the destination MAC filter for this ACE.
Any: no DMAC filter is specified (DMAC filter status is “don't-care”).
MC: frame must be multicast.
BC: frame must be broadcast.
UC: frame must be unicast.
Specific: If you want to filter a specific destination MAC address with the ACE, choose this value.
A field for entering a DMAC value appears.