Black Box LE2700A, Руководство пользователя, Страница: 93 / 154

724-746-5500 | blackbox.com
Page 93
Chapter 5: Management
Table 5-64. ACL Ports Configuration screen options.
Label Description
Port The switch port number to which the following settings will be applied.
Policy ID Select to apply a policy to the port. The allowed values are 1 to 8. The default value is 1.
Action Select to Permit to permit or Deny to deny forwarding. The default value is Permit.
Rate Limiter ID Select a rate limiter for the port. The allowed values are Disabled or numbers from 1 to 15. The
default value is Disabled.
Port Copy Select which port frames are copied to. The allowed values are Disabled or a specific port number.
The default value is Disabled.
Logging Specifies the logging operation of the port. The allowed values are:
Enabled: frames received on the port are stored in the system log
Disabled: frames received on the port are not logged
The default value is Disabled.
NOTE: System log memory capacity and logging rate is limited.
Shutdown Specifies the shutdown operation of this port. The allowed values are:
Enabled: if a frame is received on the port, the port will be disabled.
Disabled: port shut down is disabled.
The default value is Disabled.
Counter Counts the number of frames that match this ACE.
Rate Limiters
This page allows you to configure the rate limiter for the ACL of the switch.
Figure 5-85. ACL Rate Limiter Configuration screen.