Black Box LE2700A, Руководство пользователя, Страница: 88 / 154

724-746-5500 | blackbox.com
Page 88
Chapter 5: Management
Table 5-57. Remote Control Security Configuration screen options.
Label Description
Port Port number of the remote client
IP Address IP address of the remote client. 0.0.0.0 means “any IP.”
Web Check to enable management via a Web interface
Telnet Check to enable management via a Telnet interface
SNMP Check to enable management via a SNMP interface
Delete Check to delete entries
5.8.2 Device Binding
This page provides device binding configurations. Device binding is a powerful way to monitor devices and network security.
Figure 5-78. Device Binding screen.
Table 5-58. Device Binding screen options.
Label Description
Mode Indicates the device binding operation for each port. Possible modes are:
---: disable
Scan: scans IP/MAC automatically, but no binding function
Binding: enables binding. Under this mode, any IP/MAC that does not match the
entry will not be allowed to access the network.
Shutdown: shuts down the port (No Link)
Alive Check Active Check to enable alive check. When enabled, switch will ping the device continually.
Alive Check Status Indicates alive check status. Possible statuses are:
---: disable
Got Reply: receive ping reply from device, meaning the device is still alive
Lost Reply: not receiving ping reply from device, meaning the device might have
been dead.
Stream Check Active Check to enable stream check. When enabled, the switch will detect the stream
change (getting low) from the device.
Stream Check Status Indicates stream check status. Possible statuses are:
---: disable
Normal: the stream is normal.
Low: the stream is getting low.
DDoS Prevention Action Check to enable DDOS prevention. When enabled, the switch will monitor the
device against DDOS attacks.