Black Box LE2700A Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 154

Black Box LE2700A Скачать руководство пользователя страница 72

724-746-5500 | blackbox.com

Page 72

Chapter 5: Management

Table 5-38 (continued). QoS Ingres Port Classification screen options.

Label

Description

PCP

Controls the default PCP value.
All frames are classified to a PCP value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the PCP value in
the tag. Otherwise the frame is classified to the default PCP value.

DEI

Controls the default DEI value.
All frames are classified to a DEI value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the DEI value in the
tag. Otherwise the frame is classified to the default DEI value.

Tag Class

Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode to configure the mode and/or mapping.

NOTE: This setting has no effect if the port is VLAN unaware. Tagged frames received on VLAN-

unaware ports are always classified to the default QoS class and DP level.

DSCP Based

Click to enable DSCP Based QoS Ingress Port Classification.

5.6.3 Port Tag Remaking

This page provides an overview of QoS Egress Port Tag Remarking for all switch ports.

Figure 5-59. QoS Egress Port Tag Remarking.

«
...
70
71
72
73
74
...
»

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов