Black Box LE2700A, Руководство пользователя, Страница: 65 / 154

724-746-5500 | blackbox.com
Page 65
Chapter 5: Management
Figure 5-51. SNMP Trap Configuration screen.
Table 5-31. SNMP Trap Configuration screen options.
Label Description
Trap Mode Indicates existing SNMP trap mode. Possible modes include:
Enabled: enable SNMP trap mode
Disabled: disable SNMP trap mode
Trap Version Indicates the supported SNMP trap version. Possible versions include:
SNMP v1: supports SNMP trap version 1
SNMP v2c: supports SNMP trap version 2c
SNMP v3: supports SNMP trap version 3
Trap Community Indicates the community access string when sending SNMP trap packets. The allowed string length is
0 to 255, and only ASCII characters from 33 to 126 are allowed.
Trap Destination
Address Indicates the SNMP trap destination address.
Trap Destination IPv6
Address Provides the trap destination IPv6 address of this switch. IPv6 address consists of 128 bits represented
as eight groups of four hexadecimal digits with a colon separating each field (:). For example, in
'fe80::215:c5ff:fe03:4dc7', the symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also uses a
following legally IPv4 address. For example, “::192.1.2.34”
Trap Authentication
Failure Indicates the SNMP entity is permitted to generate authentication failure traps. Possible modes
include:
Enabled: enable SNMP trap authentication failure
Disabled: disable SNMP trap authentication failure
Trap Link-up and Link-
down Indicates the SNMP trap link-up and link-down mode. Possible modes include:
Enabled: enable SNMP trap link-up and link-down mode
Disabled: disable SNMP trap link-up and link-down mode
Trap Inform Mode Indicates the SNMP trap inform mode. Possible modes include:
Enabled: enable SNMP trap inform mode
Disabled: disable SNMP trap inform mode