manualshive.com logo in svg

Black Box LE2700A, Руководство пользователя, Страница: 48 / 154

Поделиться
Скачать
Black Box LE2700A Скачать руководство пользователя страница 48

724-746-5500   |   blackbox.com 

Page 48

Chapter 5: Management 

Table 5-16 (continued). Port Configuration screen options.

Label

Description

Flow Control

When Auto is selected for the speed, the flow control will be negotiated to the capacity advertised by 
the link partner.  
When a fixed-speed setting is selected, that is what is used. Current Rx indicates whether pause frames 
on the port are obeyed, and Current Tx indicates whether pause frames on the port are transmitted. The 
Rx and Tx settings are determined by the result of the last auto-negotiation. 
You can check the Configured column to use flow control. This setting is related to the setting of 
Configured Link Speed.

Maximum Frame 

You can enter the maximum frame size allowed for the switch port in this column, including FCS. The 
allowed range is 1518 bytes to 9600 bytes.

Power Control

Shows the current power consumption of each port in percentage. The Configured column allows you to 
change power saving parameters for each port.  
Disabled: all power savings functions are disabled. 
ActiPHY: link down and power savings enabled. 
PerfectReach: link up and power savings enabled. 
Enabled: both link up and link down power savings enabled.

Total Power Usage

Total power consumption of the board, measured in percentage.

Save

Click to save changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Refresh

Click to refresh the page. Any changes made locally will be undone.

5.3.2 Port Trunk

This page allows you to configure the aggregation hash mode and the aggregation group.

Figure 5-24. Aggregation Mode Configuration screen.

Table 5-17. Aggregation Mode Configuration screen options.

Label

Description

Source MAC Address

Calculates the destination port of the frame. You can check this box to enable the source 
MAC address, or uncheck to disable. By default, Source MAC Address is enabled.

Destination MAC Address 

Calculates the destination port of the frame. You can check this box to enable the destination 
MAC address, or uncheck to disable. By default, Destination MAC Address is disabled.

IP Address

Calculates the destination port of the frame. You can check this box to enable the IP address, 
or uncheck to disable. By default, IP Address is enabled.

TCP/UDP Port Number

Calculates the destination port of the frame. You can check this box to enable the TCP/UDP 
port number, or uncheck to disable. By default, TCP/UDP Port Number is enabled.

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов