manualshive.com logo in svg

Black Box LE2700A, Руководство пользователя, Страница: 44 / 154

Поделиться
Скачать
Black Box LE2700A Скачать руководство пользователя страница 44

724-746-5500   |   blackbox.com 

Page 44

Chapter 5: Management 

5.1.11 Firmware Update

This page allows you to update the firmware of the switch.

Figure 5-16. Firmware Update screen.

5.2 DHCP Server

The switch provides DHCP server functions. By enabling DHCP, the switch will become a DHCP server and dynamically assigns IP 
addresses and related IP information to network clients.

5.2.1 Basic Settings

This page allows you to set up DHCP settings for the switch. You can check the Enabled checkbox to activate the function. Once 
the box is checked, you will be able to input information in each column.

Figure 5-17. DHCP Server Configuration screen.

5.2.2 Dynamic Client List

When DHCP server functions are activated, the switch will collect DHCP client information and display in the following table.

Figure 5-18. DHCP Dynamic Client List.

5.2.3 Client List

You can assign a specific IP address within the dynamic IP range to a specific port. When a device is connected to the port and 
requests for dynamic IP assigning, the switch will assign the IP address that has previously been assigned to the connected device.

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов