Black Box LE2700A, Руководство пользователя, Страница: 41 / 154

724-746-5500 | blackbox.com
Page 41
Chapter 5: Management
Table 5-8. LLDP Configuration screen options.
Label Description
Port The switch port number to which the following settings will be applied.
Mode Indicates the selected LLDP mode.
Rx only: the switch will not send out LLDP information, but LLDP information from its neighbors will be analyzed.
Tx only: the switch will drop LLDP information received from its neighbors, but will send out LLDP information.
Disabled: the switch will not send out LLDP information, and will drop LLDP information received from its neighbors.
Enabled: the switch will send out LLDP information, and will analyze LLDP information received from its neighbors.
LLDP Neighbor Information
This page provides a status overview for all LLDP neighbors. The following table contains information for each port on which an
LLDP neighbor is detected. The columns include the following information:
Figure 5-12. LLDP Neighbor Information screen.
Table 5-9. LLDP Neighbor Information screen options.
Label Description
Local Port The port that you use to transmits and receives LLDP frames.
Chassis ID The identification number of the neighbor sending out the LLDP frames.
Remote Port ID The identification of the neighbor port.
System Name The name advertised by the neighbor.
Port Description The description of the port advertised by the neighbor.
System
Capabilities Description of the neighbor's capabilities. The capabilities include:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS Cable Device
8. Station Only
9. Reserved
When a capability is enabled, a (+) will be displayed. If the capability is disabled, a (-) will be displayed.
Management
Address The neighbor's address that can be used to help network management. This may contain the neighbor's IP
address.
Refresh Click to refresh the page immediately.
Auto-Refresh Check to enable an automatic refresh of the page at regular intervals.