manualshive.com logo in svg

Black Box LE2700A, Руководство пользователя, Страница: 38 / 154

Поделиться
Скачать
Black Box LE2700A Скачать руководство пользователя страница 38

724-746-5500   |   blackbox.com 

Page 38

Chapter 5: Management 

Table 5-3. Authentication Method Configuration screen options.

Label

Description

Client

The management client for which the configuration below applies.

Authentication 
Method

Authentication Method can be set to one of the following values: 
None: authentication is disabled and login is not possible. 
Local: local user database on the switch is used for authentication. 
Radius: a remote RADIUS server is used for authentication.

Fallback

Check to enable fallback to local authentication. 
If none of the configured authentication servers are active, the local user database is used for  
authentication. This is only possible if Authentication Method is set to a value other than none or local.

Save

Click to save changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

5.1.4 IP Settings

You can configure IP information of the switch in this page.

Figure 5-7. IP Configuration screen.

Table 5-4. IP Configuration screen options.

Label

Description

DHCP Client

Enable the DHCP client by checking this box. If DHCP fails or the configured IP address is zero, DHCP will 
retry. If DHCP retry fails, DHCP will stop trying and the configured IP settings will be used.

IP Address

Assigns the IP address of the network in use. If DHCP client function is enabled, you do not need to assign 
the IP address. The network DHCP server will assign the IP address to the switch and it will be displayed in 
this column. The default IP is 192.168.10.1.

IP Mask 

Assigns the subnet mask of the IP address. If DHCP client function is enabled, you do not need to assign 
the subnet mask.

IP Router

Assigns the network gateway for the switch. The default gateway is 192.168.10.254.

VLAN ID

Provides the managed VLAN ID. The allowed range is 1 through 4095.

DNS Server

Provides the IP address of the DNS server in dotted decimal notation.

Save

Click to save changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

 

 

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов