Black Box LE2700A Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 154

Black Box LE2700A Скачать руководство пользователя страница 129

724-746-5500 | blackbox.com

Page 129

Chapter 5: Management

Table 5-97. Power Over Ethernet Status screen options.

Label

Description

Local Port

The switch port number to which the following settings will be applied.

PD Class

Each power device is classified according to the class that defines the maximum power consumed by
the PD.
This setting includes five classes:
Class 0: Max. power 15.4 W
Class 1: Max. power 4.0 W
Class 2: Max. power 7.0 W
Class 3: Max. power 15.4 W
Class 4: Max. power 30.0 W

Power Requested

Shows the amount of power requested by the powered device.

Power Allocated

Shows the amount of power the switch has allocated for the powered device.

Power Used

Shows how much power the powered device currently is using.

Current Used

Shows how much current the PD currently is using.

Priority

Shows the port's priority configured by the user.

Port Status

Shows the port's status. The status can be one of the following values:
PoE not available: no PoE chip found
PoE turned OFF: PoE is disabled by user.
PoE turned OFF: power budget exceeded. The total requested or used power by the powered devices
exceeds the maximum power the power supply can deliver, and port(s) with the lowest priority will
be powered down.
No PD detected: no powered devices detected on the port.
PoE turned OFF: powered devices overload. The powered devices have requested or used more
power than the port can deliver, and the port is powered down.
PoE turned OFF: the powered device is turned off.
Invalid PD: the power device is detected, but is not working correctly.

«
...
127
128
129
130
131
...
»

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов