Black Box LE2700A Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 154

Black Box LE2700A Скачать руководство пользователя страница 122

724-746-5500 | blackbox.com

Page 122

Chapter 5: Management

Table 5-90. Detailed Port Statistics Port 1 screen options.

Label

Description

Rx and Tx Packets

The number of received and transmitted (good and bad) packets.

Rx and Tx Octets

The number of received and transmitted (good and bad) bytes, including FCS, except framing bits.

Rx and Tx Unicast

The number of received and transmitted (good and bad) unicast packets.

Rx and Tx Multicast

The number of received and transmitted (good and bad) multicast packets.

Rx and Tx Broadcast

The number of received and transmitted (good and bad) broadcast packets.

Rx and Tx Pause

The number of MAC Control frames received or transmitted on this port that have an opcode
indicating a PAUSE operation.

Rx Drops

The number of frames dropped due to insufficient receive buffer or egress congestion.

Rx CRC/Alignment

The number of frames received with CRC or alignment errors.

Rx Undersize

The number of short1 frames received with a valid CRC.

Rx Oversize

The number of long2 frames received with a valid CRC.

Rx Fragments

The number of short1 frames received with an invalid CRC.

Rx Jabber

The number of long2 frames received with an invalid CRC.

Rx Filtered

The number of received frames filtered by the forwarding process.

Tx Drops

The number of frames dropped due to output buffer congestion.

Tx Late/Exc.Coll.

The number of frames dropped due to excessive or late collisions.

1. Short frames are frames smaller than 64 bytes.

2. Long frames are frames longer than the maximum frame length configured for this port.

5.10.3 Port Mirroring

You can configure port mirroring on this page.

To solve network problems, selected traffic can be copied, or mirrored, to a mirror port where a frame analyzer can be attached
to analyze the frame flow.

The traffic to be copied to the mirror port is selected as follows:

All frames received on a given port (also known as ingress or source mirroring).

All frames transmitted on a given port (also known as egress or destination mirroring).

Port to mirror is also known as the mirror port. Frames from ports that have either source (rx) or destination (tx) mirroring enabled
are mirrored to this port. Disabled option disables mirroring.

«
...
120
121
122
123
124
...
»

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов