Black Box LE2700A Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 154

Black Box LE2700A Скачать руководство пользователя страница 101

724-746-5500 | blackbox.com

Page 101

Chapter 5: Management

Table 5-72 (continued). TCP Parameters and UDP Parameters screens options.

Label

Description

TCP/UDP
Destination Filter

Specifies the TCP/UDP destination filter for the ACE
Any: no TCP/UDP destination filter is specified (TCP/UDP destination filter status is "don't-care").
Specific: if you want to filter a specific TCP/UDP destination filter with the ACE, you can enter a specific TCP/
UDP destination value. A field for entering a TCP/UDP destination value appears.
Range: if you want to filter a specific range TCP/UDP destination filter with the ACE, you can enter a specific
TCP/UDP destination range. A field for entering a TCP/UDP destination value appears.

TCP/UDP
Destination
Number

When Specific is selected for the TCP/UDP destination filter, you can enter a specific TCP/UDP destination
value. The allowed range is 0 to 65535. A frame matching the ACE will use this TCP/UDP destination value.

TCP/UDP
Destination
Range

When Range is selected for the TCP/UDP destination filter, you can enter a specific TCP/UDP destination
range value. The allowed range is 0 to 65535. A frame matching the ACE will use this TCP/UDP destination
value.

TCP FIN

Specifies the TCP FIN (“no more data from sender”) value for the ACE.
0: TCP frames where the FIN field is set must not be able to match this entry.
1: TCP frames where the FIN field is set must be able to match this entry.
Any: any value is allowed (“don't-care”).

TCP SYN

Specifies the TCP SYN (“synchronize sequence numbers”) value for the ACE
0: TCP frames where the SYN field is set must not be able to match this entry.
1: TCP frames where the SYN field is set must be able to match this entry.
Any: any value is allowed (“don't-care”).

TCP PSH

Specifies the TCP PSH (“push function”) value for the ACE
0: TCP frames where the PSH field is set must not be able to match this entry.
1: TCP frames where the PSH field is set must be able to match this entry.
Any: any value is allowed (“don't-care”).

TCP ACK

Specifies the TCP ACK (“acknowledgment field significant”) value for the ACE
0: TCP frames where the ACK field is set must not be able to match this entry.
1: TCP frames where the ACK field is set must be able to match this entry.
Any: any value is allowed (“don't-care”).

TCP URG

Specifies the TCP URG (“urgent pointer field significant”) value for the ACE
0: TCP frames where the URG field is set must not be able to match this entry.
1: TCP frames where the URG field is set must be able to match this entry.
Any: any value is allowed (“don't-care”).

5.8.4 AAA

Common Server Configurations

This page allows you to configure authentication servers.

Figure 5-93. Authentication Server Configuration screen.

«
...
99
100
101
102
103
...
»

Содержание LE2700A



























































































































































Отзывы:

Нет отзывов