Black Box KV9502A, Инструкция по эксплуатации, Страница: 18 / 19

15
CHAPTER 4: Operation
Table 4-1. Hotkey commands.
Command Description
<Left-Ctrl><Left-Ctrl>
X
Switch to PC “X”.
<Left-Ctrl><Left-Ctrl> <up arrow> Switch to previous active PC.
<Left-Ctrl><Left-Ctrl> <down arrow> Switch to next active PC.
<Left-Ctrl><Left-Ctrl>
F1
Begin AutoScan.
<Left-Ctrl><Left-Ctrl>
F2
Manual scan.
<Left-Ctrl><Left-Ctrl>
F3
Set the time before switching to the next
computer in sequence. The ServSwitch
generates 1 to 4 beeps indicating scan
intervals of 3, 8, 15, and 30 seconds.
Any key Stop AutoScan.
<Left-Ctrl><Left-Ctrl>
F4
Set the keyboard typematic rate
(characters/sec). The ServSwitch
generates 1 to 4 beeps indicating 10,
15, 20, and 30 characters per second.
<Left-Ctrl><Left-Ctrl>
S
Enable/disable “beep” sound.
X
= 1, 2, 3, 4