Black Box KV9502A, Инструкция по эксплуатации, Страница: 16 / 19

13
CHAPTER 3: Installation
3.2.2 C
ONNECTING THE
C
OMPUTERS
Using the all-in-one DVI cable (EHN900024P-0006 or -0010), connect a computer
to the ServSwitch. Following the KV99 standard, connect the cable’s 6-pin mini-
DIN connectors to the computer’s keyboard and mouse ports. Connect the cable’s
DVI-I connector to your computer’s DVI-I monitor port as shown in Figure 3-2.
Connect the mini-DIN and DVI-I connectors on the other end of the cable to the
ServSwitch. Follow the same procedure to connect the other computers.
Figure 3-2. Computer connection.
3.2.3 I
NITIAL
P
OWER
O
N
After connecting the ServSwitch, power on the computers. The ServSwitch will get
enough power to operate from the computers.
PS/2
computer
ServSwitch
cable