Black Box KV101A, Руководство пользователя, Страница: 73 / 77

SERVSWITCH™ CONSOLE PLUS
72
Kernel halt error messages
Message Description
BAD Address = nn Kernel memory is corrupt, hardware failure.
Resetting to factory
defaults A memory error is detected during a read from
configuration memory. This also indicates a
hardware failure, but the system may continue to
initialize successfully. The configuration from
another Unit should be saved to this Unit as soon
as possible.
Unit Halted A major error has forced the kernel to stop
processing. The ServSwitch Console Plus waits to
receive a kernel or main firmware file from the
bottom board’s serial port using the serial
parameters: 9600, N, 8, 1. Connect the serial cable
supplied with the ServSwitch Console Plus as
described in the Serial Port section, start a
terminal emulator and transfer the file using an
ASCII file transfer protocol.
Kernel is bad, load
new kernel through
serial port.
The unit waits to receive a kernel or main
firmware file from the bottom board’s serial port
using the serial parameters: 9600, N, 8, 1.
Connect the serial cable supplied as described in
the Serial Port Section, start a terminal emulator
and transfer the file using an ASCII file transfer
protocol.
Checksum error
The kernel writes this message at power up when a
memory error is detected during a read from
program memory.