Black Box iPATH ACR1000A-CTL-192 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 101

Black Box iPATH ACR1000A-CTL-192 Скачать руководство пользователя страница 52

52

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

The other user pages (e.g. Add User, View User Groups, etc.) are selectable within the blue section located just below the tabs.

SEARCH FILTERS

The key fields (Username, First Name and Last Name) all provide a search filter to locate particular items
within long lists. Enter a full or partial search string into the appropriate filter box and then click to start
the search. Optionally use the

buttons to invert the order of the listing.

The page will reload with the same pagination/sort order, but with the added search filter. It’s possible to
filter by several columns at once (e.g. search for all entries with “B” in the Username, and “Smith” in the Last Name). Search terms
are case-insensitive. You can re-sort and paginate on filtered results without losing the filters.
To remove a filter, click the red cross next to the relevant filter, (you can also empty the search box and click again).

4.11.1 USERS > VIEW USERS PAGE

The table shows the following information for each user:

• AD - indicates whether the user was imported from Active Directory
• Username

• First Name

• Last Name

•  User Groups - the number of user groups to which the user belongs
•  Channels - the number of channels to which the user has access
•  Remotes - the number of remotes to which the user has access
•  Allow Private? - indicates whether the user is permitted to access channels in private mode (

- Yes, - No, - Inherited

setting from user groups)

• Remote OSD? - indicates whether the user is permitted to gain OSD access to remotes in order to change channels (

- Yes,

- No, - Inherited setting from user groups)

• Suspended - indicates the user account status (

- User is suspended,

- User account is active, i.e. not suspended)

• iPATH Admin - indicates whether the user has admin privileges

The Edit option icons are as follows:

Configure user

: Displays the “Configure User” page.

Clone user:

Create a complete copy of the currently selected user entry.

Delete user

: Confirmation will be requested.

4.11 THE USERS TAB

The Users tab shows a paginated table of all users within the iPATH network. Within the list, the admin user is always present and
cannot be deleted - in order to avoid being locked out of the iPATH system.
Click the USERS tab to view the initial View Users page.

«
...
50
51
52
53
54
...
»

Содержание iPATH ACR1000A-CTL-192






































































































Отзывы:

Нет отзывов