21
iCOMPEL Deployment Manager (IDM)
User Guide (V3.1.0)
Getting Started with Your Digital Signage Network
To change the columns displayed, click the
button and check or uncheck the relevant boxes:
Note
: Although
IDM
changes the columns displayed as you click the boxes, the information may only be updated
when the player next reports. Not all players can provide all of the information listed.
list all of the column names and describes the information they contain.
1.4.6 Responding to Alarms
As described in
,
IDM
displays alarms if the data reported by players falls outside of
the parameters you have specified. (For details on configuring alarms, see
.)
In outline, the alarm process follows this sequence:
1.
IDM
raises an alarm. You decide what action, if any, is needed.
2. Optionally, you acknowledge the alarm with a reason (usually the action in response to the alarm). Note that you
cannot lower an alarm manually.
3.
IDM
lowers the alarm when the alarm condition no longer applies.
To clarify the procedure you follow, including the steps you take to acknowledge an alarm, here is a worked example (the
alarm is
Report Overdue
):
1.
IDM
reports the alarm in the player's
Alarms
column (and displays the
icon next to the relevant folders plus here
in the optional
State
column):
58
12
35
Содержание IDM-AP-100
