19
USB DIRECTOR HUBS
4.2 Installing the Drivers for Windows 95 Users
After connecting the USB cable, if the following screen
(Figure 4-1) does not appear, go to
Section 3.5
.
Figure 4-1. Update Device Driver Wizard.
To install the USB Director Hub drivers:
1. Insert the Driver disk into drive A:.
2. Click on NEXT and initiate a floppy-drive search
for the updated driver device.
3. Click on FINISH to continue with the installation.
The Insert Disk screen (Figure 4-2) will appear.
Update Device Driver Wizard
< Back
Finish
Cancel
Windows found the following updated driver for this device.
USB Director Hub
If you want to use this driver, click Finish. If this is not the correct
driver and you want to search for a different driver manually,
click Other Locations.
Location of Driver
Other Locations…