Black Box ET0010A Скачать руководство пользователя страница 165 | Manualshive

Страница: 165 / 212

Black Box ET0010A Скачать руководство пользователя страница 165

Command Reference

166

ETEP CLI User Guide

Syntax

policy-action {protect | discard | bypass}

Attributes

protect

-

Packets that match the policy selectors will be encrypted.

discard

-

Packets that match the policy selectors will be discarded.

bypass

-

Packets that match the policy selectors will be passed in the clear.

This is the default.

Usage Guidelines

This command is used in conjunction with other policy commands to create management port policies or
local-site policies. A policy definition consists of a name, action, selectors, and priority. For encryption
policies, you must also specify encryption and authentication algorithms.

Example

The following example sets the policy action to protect in a management port policy. The example
assumes that MyPolicy has already been added to the ETEP.

admin>

configure

config>

management-interface

man-if>

ipsec-config

ipsec-config>

policy-config MyPolicy

policy-config>

policy-action protect

The next example sets the policy action to bypass in a local-site policy. The example assumes that
AnotherPolicy has already been added to the ETEP.

admin>

configure

config>

policies

policies

> local-site-policies

local-site-policy>

policy-config AnotherPolicy

policy-config>

policy-action bypass

policy-add

Description

The

policy-add

command adds a policy to the ETEP. This command is available when working with

IPsec policies on the ETEP management interface and local-site policies.

User Type

Administrator

Hierarchy Level

●

ipsec-config mode (config > management-interface > ipsec-config)

●

local-site configuration mode (config> policies > local-site-policies)

«
...
163
164
165
166
167
...
»

Содержание ET0010A





















































































































































































































Отзывы:

Нет отзывов