Black Box ET0010A Скачать руководство пользователя страница 159

Страница: 159 / 212

Command Reference

160

ETEP CLI User Guide

password-enforcement

Description

The

password-enforcement

command configures the password control policy on the ETEP, which

includes the stringency of password conventions, expiration, and history exclusion.

User Type

Administrator

Hierarchy Level

User-config mode (config > user-config)

Syntax

password-enforcement {default | strong}

Attributes

default –

Enforces the default password controls. This is the default setting.

strong –

Enforces strong password controls.

Usage Guidelines

Strong password controls enforce more stringent password rules and conventions than the default
password controls. The strong controls affect the following items:

●

Password conventions

●

Password history exclusion, which limits the reuse of passwords

●

Password expirations, warnings, and grace periods

●

Maximum number of login sessions allowed per user

The strong password controls enforce the following rules on any password that is entered after strong
password enforcement is enabled.

Содержание ET0010A





















































































































































































































Результаты поиска

Содержание ET0010A

Отзывы:

Black Box ET0010A, Руководство пользователя CLI, Страница: 159 / 212

Результаты поиска

Содержание ET0010A

Отзывы: