Black Box ET0010A, Руководство пользователя CLI

Страница: 135 / 212

Command Reference
136 ETEP CLI User Guide
Syntax
date {<year> <month> <day> <hour> <minutes> <seconds>}
Attributes
day –
01–31
hour –
00–23
minutes –
00–59
seconds –
00–59
Usage Guidelines
The time zone on the ETEP is set to UTC 0 (Coordinated Universal Time), and is not user configurable.
Enter the date and time relative to UTC 0, also referred to as Greenwich Mean Time (GMT). To calculate
the local time relative to UTC, add or subtract the offset hours from UTC for the local time zone (UTC ±
n) . The following examples give the local time at various locations at 12:00 UTC when daylight saving
time is not in effect:
●
New York City, United States: UTC-5; 07:00
●
New Delhi, India: UTC+5:30; 17:30
Rebooting is not required when setting the date and time during initial setup of the ETEP. We
recommend rebooting the appliance after changing the date and time under other circumstances.
If you are setting the date because of a certificate problem and cannot communicate with the appliance
using ETEMS:
●
Issue the date command to change the date and time
●
Issue the filesystem-reset command after you change the date in order to regenerate a certificate on
the ETEP. This is a drastic step that wipes out your existing configuration data and policies, and
automatically reboots the appliance. See
“filesystem-reset” on page 143 prior to issuing this
command.
Example
admin> configure
config>
date 2008 08 11 15 30 00
debug-shell
Description
The debug-shell command provides access to a number of system files that can be useful when
troubleshooting problems with the ETEP. This command is intended for use only by customer support
and authorized Black Box personnel. Incorrect use of the debug shell can permanently damage the ETEP
file system and render the unit inoperable.
User Type
Administrator