Black Box ET0010A, Руководство пользователя CLI, Страница: 133 / 212

Command Reference
134 ETEP CLI User Guide
Attributes
edit –
Clears the edit session. Pending policy changes are removed.
backup –
Clears the backup copy of the policy set.
current –
Clears the active policies that are running on the ETEP, pending policies, and the backup
policy set. This is the default setting.
Usage Guidelines
The clear-policy-set command clears the specified policy files, returning them to their factory state. The
scope of the clear-policy-set command is limited to the configuration mode in which you are operating
when the command is issued: it affects either the management port policies or the local-site policies on
the data ports. This command does not affect EncrypTight distributed key policies or Layer 2 point-to-
point policies.
Clearing the current policies removes the active policies that are running on the ETEP, pending policies,
and the backup copy of the policy set. Clearing the management port policies removes the policies and
then deploys the factory default IKE policy. Clearing the current policies from local-site policy mode
removes all local site policies.
The edit and backup options remove only the pending policies or backup policy set, respectively. These
options do not affect the active, deployed policies.
The clear-policy-set command requires confirmation to execute.
Example
admin>
configure
config> policies
policies>
local-site-policies
local-site-policy> clear-policy-set backup
cli-inactivity-timer
Description
The cli-inactivity-timer command sets an inactivity timer for the CLI. The timer applies to a CLI session
initiated through the serial port or through SSH.
User Type
Administrator
Hierarchy Level
Configuration mode
Syntax
cli-inactivity-timer {<n>}