Black Box ET0010A, Руководство пользователя CLI

Страница: 132 / 212

Commands
ETEP CLI User Guide 133
clear-policies
Description
The clear-policies command replaces the active EncrypTight distributed key policies with a default policy
that passes all traffic in the clear.
User Type
Administrator
Hierarchy Level
Policies mode (config > policies)
Syntax
clear-policies
Usage Guidelines
The clear-policies command clears EncrypTight distributed key policies. It does not affect Layer 2 point-
to-point policies, local-site policies, or IPsec policies on the management port.
This command removes all encrypt and drop policies currently installed on the ETEP. All traffic is sent in
the clear until you create and deploy new policies, or until the policies are rekeyed. You will be prompted
for confirmation.
Example
admin>
configure
config> policies
policies>
clear-policies
clear-policy-set
Description
The clear-policy-set command clears the specified policy files, returning them to their factory state. This
command is available when working with IPsec policies on the ETEP management interface and local-
site policies.
User Type
Administrator
Hierarchy Level
●
ipsec-config mode (config > management-interface > ipsec-config)
●
local-site configuration mode (config> policies > local-site-policies)
Syntax
clear-policy-set {edit | backup | current}