manualshive.com logo in svg

Black Box ControlBridge CB-ACC-232DCE-30, Руководство пользователя, Страница: 41 / 52

Поделиться
Скачать
Black Box ControlBridge CB-ACC-232DCE-30 Скачать руководство пользователя страница 41

Page 41

877-877-2269   |   blackbox.com 

Chapter 7: Admin Control Panel

IP Settings

Figure 7-3. IP Settings tab.

This page is used for setting the communication parameters for your ControlBridge Unit. 

The ControlBridge Unit uses standard internet protocol (IP) communication parameters. Certain parameters can be reset by the user. 
On start up, this page will display the ControlBridge Unit’s given Physical address (MAC), and Current IP Address. Carefully note this 
addressing information (and any changes you elect to make to the IP address, subnet mask, or default gateway). You must enter this 
information into the ControlBridge Builder program written for your specific application. For control systems with more than one 
ControlBridge Units, you must give a unique IP address to each ControlBridge Unit.

Some control systems are “standalone” and not part of a larger network.  For such “standalone” systems, the Host name 
is optional. However, for control systems that are connected to a larger network, obtain the Host name from the network 
administrator, and enter it into the corresponding box. DHCP is not supported in this release. 

Be sure to click the Apply button for any changes to become effective!

SMTP

Figure 7-4. SMTP tab.

This page is used to set SMTP server parameters. Set a name or an address and the port of your SMTP server.

The SMTP server and port are used by the XPL2 commands EmailSend and PresetEmailSend.

Содержание ControlBridge CB-ACC-232DCE-30





















































Отзывы:

Нет отзывов