manualshive.com logo in svg

Black Box ControlBridge CB-ACC-232DCE-30, Руководство пользователя, Страница: 34 / 52

Поделиться
Скачать
Black Box ControlBridge CB-ACC-232DCE-30 Скачать руководство пользователя страница 34

877-877-2269   |   blackbox.com 

Page 34

Chapter 5: Connecting

IR/SERIAL

This type of port provides:

• Output for infra-red emitters (IR Adapters); the maximum IR output rate is 1.2 MHz.

•  For RS-232 serial output (one way), the maximum serial data rate is 115 200 Bd (bps), and output signal levels  

for RS-232 are in the -12 V to +12 V range.

The IR outputs and RS-232 outputs can be combined on independent outputs (for example, three outputs can be used as IR, 
and five outputs can be used as RS-232).

Table 5-17. IR/Serial.

IR/SERIAL 

2-pin 3.5 mm

Pin

Signal

Description

S G

S

Signal

IR/Serial Signal (Output)

G

GND

Ground

NOTES:

• All pins labelled G are connected together.

• Up to three original infra-red emitters (IR Adapters) can be connected to each output in parallel

•  We do not recommend connecting more infra-red emitters from various manufacturers in parallel, because the output can 

be either overloaded or damaged.

Содержание ControlBridge CB-ACC-232DCE-30





















































Отзывы:

Нет отзывов