manualshive.com logo in svg

Black Box ControlBridge CB-ACC-232DCE-30, Руководство пользователя, Страница: 27 / 52

Поделиться
Скачать
Black Box ControlBridge CB-ACC-232DCE-30 Скачать руководство пользователя страница 27

Page 27

877-877-2269   |   blackbox.com 

Chapter 5: Connecting

5.5 V.ersatile I/O Ports

Depending on the application, the versatile I/O ports can be used in multiple ways as described in the following table.

Table 5-10. Versatile port functions.

Input modes

Digital input

Adjustable threshold

•  High sensitivity - binary 0 < 1.45 V, binary 1 > 2.05 V
•  Low sensitivity - binary 0 < 5.8 V, binary 1 > 8.2 V

Input impedance >100 k

Ω

Adjustable digital filter

Pulse counter

Adjustable threshold as above
Input impedance as above
Pulse length min. 1 ms, max. frequency 500 Hz
Max. number of pulses 2 147 483 647 (Long)
Adjustable digital filter

Voltage input

Range 0 to 2.5 VDC, 0 to 10 VDC, auto
Input impedance >100 k-ohms
Resolution 12-bit
Adjustable digital filter
Accuracy ±0.1 % of reading, ±0.1 % of range 
(0.1 to 10 V, digital filter applied)

Resistance input

Range 2 kohms, 20 kohms, 200 kohms, auto¸
Resolution 12-bit
Adjustable digital filter
Accuracy (digital filter applied)

•  100 ohms to 800 ohms: ±3 % of reading, ±0.1 % of range
•  800 ohms to 20 kohms: ±0.3 % of reading, ±0.1 % of range
•  20 kohms to 200 kohms: ±1 % of reading, ±0.1 % of range

Output modes

Digital output

Max. sink current 200 mA / max. 30 VDC
Catch diodes for use with real load

Current pullup

Current-source pull-up 12 V / 10 mA

Current pulldown

Current-source pull-down -12 V / 10 mA 

IR output

Maximum IR carrier frequency 500 kHz
Up to 3 original IR Adapter in parallel

Serial output

RS-232
Serial data baud rate 300 bps ÷ 115,200 bps

Warnings

• The port is protected to 30 VDC maximum. Exceeding this voltage may damage the port.

• Incorrect wiring may damage the versatile port or the connected device.

•  All versatile ports in the unit have common ground, which connects to the grounds of other control ports.  

That means versatile ports are not isolated from other control ports.

Table 5-11. Connector pinout.

Содержание ControlBridge CB-ACC-232DCE-30





















































Отзывы:

Нет отзывов