CITYLIGHT 10/100 ETHERNET TRANSCEIVER CARD
11
Token
Cu
Ins
RX
Al
Data Bcn
4/16
Token
Ring
Rem.F.
Pwr
1
Pwr
2
CityLIGHT
Single-mode
fiber link
up to 50 km
Crossover Cable
Crossover Cable
PC running SNMPc
Crossover cable
Token
Cu
Ins
RX
Al
Data Bcn
4/16
Token
Ring
Rem.F.
CityLIGHT SNMP Card
CityLIGHT 10/100
Ethernet Transceiver Card
CityLIGHT 10/100 Ethernet Transceiver
Card
Switch with Auto-negotiation port
capable of running 10 or 100 Mbps
A typical application interconnecting
two sites over a long fiber link.
The CityLIGHT Sideband
management provides monitoring of
both the 10/100 cards on the link.
The default settings of the
CityLIGHT 10/100 Ethernet
Transceiver Card permit auto-
negotiation at each end.
This automatically allows
connections to 10 Mbps and 100
Mbps systems in Half- or Full-Duplex
mode.
The inter-switch link is always up to
36 km for standard power devices
and up to 50 km for high power.
Switch with Auto-negotiation port
capable of running 10 or 100 Mbps
Figure 2 - Typical Application
The example above shows the simplest CityLIGHT configuration. The CityLIGHT
10/100 Ethernet Transceiver can be used in any of the CityLIGHT chassis
including the 3U Chassis which can manage up to 32 devices from 1 SNMP agent.
