21
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: RS-232 CONTROL
TABLE 5-1 (C0NTINUED). RS-232 COMMANDS
COMMAND
FUNCTION
FEEDBACK EXAMPLE
OPERATION COMMANDS (CONTINUED)
EDIDMInit.
Reset factory default EDID
EDIDMInit.
EDIDM[X]B[Y].
Manage EDID, enable input [Y] learn EDID data from output [X]
EDIDM07B03
PWON.
Work normally
PWON
PWOFF.
Enter standby mode
PWOFF
STANDBY.
Enter standby mode, wake up via front panel button operation
STANDBY
/+[Y]/[X]:******.
/+N[Y]/[X]:******.
/+F[Y]/[X]:*****.
Set communication between PC and HDBaseT receiver.
Y is for RS232 port (connect with RS232 port of HDBaseT receiver), Y=1-32
X is for baud rate, its value ranges from 1 to 7 (1=2400; 2=4800; 3=9600; 4=19200;
5=38400; 6=57600; 7=115200
***** is for data (max 48 Byte)
Send “/+[Y]/[X]. *****.” to the corresponding HDBaseT receiver to control far-end device
when the Matrix Switcher is working properly.
Send “/+N[Y]/[X]. *****.” to the corresponding HDBaseT receiver when the Matrix Switcher
is PWON.
Send “/+F[Y]/[X]:*****.” to the corresponding HDBaseT receiver whe the Matrix Switcher is
PWOFF.
601% Volume of MIC : 60
(****** and feedback from
HDBT receiver)
CustomerSerial:
1111111111111111111.
Set the customer serial number
customer serial is
1111111111111111111
HDCPON.
Open HDCP for all output cards.
HDCP ON
HDCPOFF.
Close HDCP for all output cards.
HDCP OFF
%0911.
Reset factory default
Factory Default
INQUIRY COMMANDS
Status[x].
Inquire the respective input for output [x]
AV:01-> 02
Status.
Inquire respective inputs for all outputs
AV:01->02
AV:03->06
… …
CheckInKatype.
Get the input signal card type
*-- no available input signal card/output card, 1--VGA, 2--DVI, 4--BT, 5--SDI, 6--HDMI
Channel IN:*11*4**11*4*.
CheckOutKatype.
Get the output signal card type
*-- no available output signal card/input card, 1--VGA, 2--DVI, 4--BT, 6--HDMI
Channel OUT: ***4*62**1**.
%9961.
Get current keylock status
System Unlock!/ System
Locked!
%9962.
Inquire current working status
PWON/STANDBY/PWOFF
%9963.
Return all input& output connection status
Port 01 02 03 04
Mode In In In In
Port 05 06 07 08
Mode In Ou In In
.......