Black Box ACR500DP-T-R2, Руководство пользователя, Страница: 13 / 55

13
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
WW
W.B
LAC
KB
OX
.CO
M
WW
W.B
LAC
KB
OX
.CO
M
BROWSER-BASED CONFIGURATION UTILITY
The browser-based configuration utility within all TX and RX units requires a network connection between the Agility Zero U
unit and a computer on the same network. The configuration utility allows you to perform many important functions. Please see
Appendix B .
TO CONNECT A COMPUTER TO ACCESS THE CONFIGURATION UTILITY
1 Connect a CAT 5, 5e, 6, or 7 link cable to the network port on the front panel. The port automatically configures itself, so no
cross-over cable is required (but is supported if you do use one).
2 Connect the other end of the link cable directly to the network port of your computer.
TO ACCESS THE BROWSER-BASED CONFIGURATION UTILITY
Use the menu options to choose the
required configuration page
Temporary link from your
computer to the Agility Zero U
network port
1 Temporarily connect the Agility Zero U
unit and your computer, as discussed
left.
2 Run a web browser on your computer and
enter the IP address of the Agility Zero U
unit:
169.254.1.33
Note: If the IP address of Agility Zero U
unit has been changed and is not known,
providing it is appropriate to do so,
perform a
manual factory reset to restore
the default address.
The opening page of the Agility
configuration utility should be displayed:
You can find further information about the
configuration pages later in this guide:
• Appendix B - Configuration pages