11
CHAPTER 3: Installation
3. Installation
1. For the 2-port model (AC1056-2), you’ll need two
HD15 male-to-male output cables (one of these
cables is included) to connect each video splitter’s
output connector to each computer’s VGA output
connector. You’ll also need one input cable
(included).
For the 4-port model (AC1056-4), you’ll need four
output cables (three of these cables are included)
and one input cable (included).
For the 8-port model (AC1056-8), you’ll need
eight output cables (seven of these cables are
included) and one input cable (included).
Connect multiple monitors to the video splitter’s
output connectors as shown in Figure 3-1.