Black Box 37687 Скачать руководство пользователя страница 27

Страница: 27 / 212

Terminal Server User Guide
Terminal Server Features

Page 27

Chapter 1 Introduction

Software

The

Terminal Server

software features include:

• Support for TCP/IP and UDP protocols including telnet and rlogin.

• Remote access support including PPP, SLIP and CSLIP.

• Printer support via lpd, rcp, and utilities.

• Modem support via PPP and utilities.

• Utilities provide ‘fixed tty’ support for Unix systems.

• A window oriented menu interface with pop-up menus and on screen help (command line

also available).

• ARP or BOOTP for network based setup.

• Dynamic statistics displays and line status reporting for fast problem diagnosis.

• Multi screens on terminals.

• Full support of SNMP MIBs, allowing remote configuration via SNMP as well as statistics

gathering.

• Interoperability with IP routing through gateway tables.

• Domain Name Server support.

• WINS support for Windows ® environments.

• Port configuration copy and save functions.

Содержание 37687




















































































































































































































Результаты поиска

Содержание 37687

Отзывы:

Похожие инструкции для 37687

Бренды по названию

Популярные бренды

Black Box 37687, Руководство пользователя

Результаты поиска

Содержание 37687

Отзывы:

Похожие инструкции для 37687

Бренды по названию

Популярные бренды