Black & Decker KP600, Руководство пользователя

Страница: 6 / 28

6
ENGLISH
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Warning! Never connect live or neutral
wires to the earth pin marked E or ±.
Double Insulation
The tool is double insulated. This means
that all the external metal parts are
electrically insulated from the mains power supply.
This is done by placing insulated barriers between
the electrical and mechanical components so as to
making unnecessary for the tool to be earthed.
Note: Double insulation does not take the place of
normal safety precautions when operating this tool.
The insulation system is for added protection
against injury resulting from a possible electrical
insulation failure within the tool.
Use of Extension Cord
An extension cable should not be used unless
absolutely necessary. Use of an improper
extension cable could result in a risk of Are and
electric shock. If an extension cable must be used,
use only those that are approved by the country's
Electrical Authority. Make sure that extension cord
is in good condition before using. Always use the
proper size extension cord with the tool - that is,
proper wire size for various lengths of cord and
heavy enough to carry the current the tool will
draw. Use of an undersized cord will cause a drop
in line voltage resulting in loss of power and
overheating.
Make sure that the socket is fitted to the extension,
and the plug is fitted to the tool. When using a
cable reel, always unwind the cable completely.
Assembly and Adjustment
Prior to assembly and adjustment always unplug
the tool.
Fitting the Foam Applicator or Wool Bonnet
(Fig. B)
Place the foam applicator bonnet (6) or wool
bonnet (7) on pad (1) as shown. Make sure the
elastic is tucked down securely and evenly around
the underside of the pad.
Pad Removal / Replacement
The pad is designed to be easily removed for
cleaning or replacement. To remove the pad,
unscrew the screw in the middle of the pad and
remove it from the orbiting disc. When installing or
reinstalling the pad, ensure that the screw is
fastened securely on the orbiting disc.
Before Operation
Before you begin, make sure your car is clean and
dry. The work area should be dry also. If
necessary, remove road tar with a general cleaner
before polishing. Also, remove excess grease
spots, bug stains etc.
Using Liquid Wax & Paste Wax
Black & Decker recommends the use of liquid wax
with this polisher.
Using Liquid Wax (Fig. C)
Apply three swirls of liquid wax on the foam
applicator bonnet (6). DO NOT APPLY WAX
DIRECTLY TO CAR. This first application should
do about 1/4 of the car. For the second and third
applications of wax, use half the quantity stated
above. The bonnet will not absorb as much when
reloading.