1. Remove the water reservoir and fill with
water according to the cup size you are
using (G).
2. Insert water reservoir back into the unit.
3. Unlock the lid by pressing the OPEN
release lever to the open position.
4. Place appropriate pod holder in the unit
(H) (see Brewing Tips chart on page 7).
5. Insert appropriate pod into the pod holder
(J) (see Brewing Tips chart on page 7).
6. Close the lid.
7. Place cup on the cup tray. If using a tall cup
or mug, remove the drip tray (K).
Caution:
Cup tray might get hot from previous brew;
be sure it has cooled completely before touching it.
8. Press the desired brew button. The brew button
light blinks then it remains on until the brewing
cycle is finished.
Important:
Make sure that your cup size matches
your brew selection (for example; use a 7-oz. cup for
a 7-oz. brew selection), otherwise you might have an
overflow (for example; do not use 7-oz. for a 14-oz.
brew selection).
9. When the brew button indicator light goes out,
remove the filled cup from the cup tray.
10. To dispose of used pod, unlock lid and remove
the pod.
Important Tip
The lid on your unit automatically stays locked during
the brewing cycle, if there is a power failure or if it stops unexpectedly.
To unlock the lid:
1. Press the STOP button.
2. Wait a few seconds then press the OPEN release lever on the lid. The
lid opens and the STOP indicator light goes out.
3. Close the lid and start a new brew cycle with an empty cup to avoid
coffee overflow.
6
5
How to Use
This appliance is for household use only.
Important:
For warranty verification, do not remove line cord sticker.
Wash removable parts as instructed in the Care and Cleaning section.
PREPARING UNIT FOR FIRST USE
1. Remove the water reservoir from the back of the
unit (A).
2. Remove reservoir lid and fill reservoir with water
to the 7 oz., 9 oz. & creamy line. Do not overfill.
3. Press the OPEN lid release lever to unlock the lid
(B).
4. Insert a pod holder without using any coffee
pods (C).
5. Close the lid by pressing down until you hear
it snap in place (D).
6. Insert splash guard underneath the pod
holder (E).
a. Align the splash guard tabs with the side
openings on the unit.
b. Turn splash guard counterclockwise until
securely in place.
7. With lid in place, slide reservoir down securely
in place.
8. Place a 9-oz. or larger cup on the cup tray (F).
9. Plug in the unit.
10. Press the 7-oz. brew button. The blue indicator
light blinks then changes to steady blue. Once
the priming cycle is finished the unit beeps
3 times and the blue light goes out.
Note: During the priming cycle, the unit may be loud
and create a larger than normal amount of steam.
This is normal.
Now your unit is ready for use!
A
H
J
K
B
C
D
E
F
BREWING A CUP OF COFFEE
14 oz
7 oz
9 oz
Multiple brews
G
GT300Pub1000001930 5/24/05 12:10 PM Page 6
