Black & Decker BLB 1401, Руководство пользователя

Страница: 9 / 12

9
Cleaning the motor filter (fig. K)
The motor filter prevents particles and larger objects
from entering the motor housing when the container is
removed.
The filter is re-usable and should be cleaned regularly.
Remove the container from the appliance.
Take the filter out (fig. K).
Brush any loose dust off the filter.
Replace the filter.
Re-insert the container into the appliance.
Replacing the filters
If the HEPA filter (10) (fitted inside the container) is
damaged or fails to operate properly, it must be
replaced. Replacement filters are available from your
Black & Decker dealer (part. no. 764468-00).
Replacing the container filter
Proceed as described above to replace the filter (10).
Replacing the outlet filter (fig. L & M)
The appliance is fitted with a lifetime filter but if it is
required to be replaced, replace it as follows:
Remove the cover by pressing down on the locking tab. .
Remove the old filter by pulling it out.
Insert the new filter as shown.
Refit the cover.
Protecting the environment
Should you find one day that your tool needs
replacement, or if it is of no further use to you,
think of the protection of the environment. Black
& Decker repair agents will accept old Black &
Decker tools and ensure that they are disposed of
in an environmentally safe way.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual.
Press the dust container release button (on top of the
duct container) and replace the dust container in the
vacuum. (fig JO).