Black & Decker BDCV350, Руководство пользователя

Страница: 9 / 12

PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
Operating your Heater
SAFETY DEVICES
This appliance has two protection devices:
•
Tilt Switch - this will automatically turn the appliance off if the appliance is not in the correct
operating position.
•
Resettable Thermal Link - this will automatically disconnect the power to the appliance at a
pre-set overheat temperature. After cooling down it will reset and power on again. If this
occurs, investigate what is causing the appliance to overheat.
•
Thermal Fuse - this disconnects the appliance permanently in case of overheating. (It is non
resettable).
CAUTION:
The appliance generates heat during use. Proper precautions must
be taken to prevent the risk of burns, scalds, fires or other damage to persons.
CARE AND CLEANING
• The heater requires regular cleaning to ensure trouble free operation:
• Unplug the heater from the mains supply before cleaning.
• Ensure that the heater has been allowed to cool down completely before cleaning.
• The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging the appliance and vacuum cleaning the air
vents and grills.
• Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
• Never use solutions such as petrol, thinners or polishing agents.
• Ensure the heater is dry before plugging back into the mains supply.
• Do not attempt to dismantle the appliance.
• There are no user serviceable parts. For service or repair, contact an authorised electrical
service technician
9
All manuals and user guides at all-guides.com