www.bkte.pl
AL200 swinghandle manual
9
4
Standalone mode
A dedicated AR221 reader (see chapter 6 Accessories) or any other card reader with
a Wiegand interface can be connected to the handle. A handle with a connected reader
creates an autonomous access control system. It enables the assignment of 63 user IDs
who will be able to open the handle. The process of assigning user cards is performed
with the use of the master card. The process of creating a master card is described
below. All card assigning procedures are performed without the use of a computer.
4.1
Connection
Connection diagram of two handles with readers in the cabinet
Devices used (see chapter 6 Accessories)
1 AL200 swinghandle
122AL002000
2 AR221 card reader
122AR002210
3 Any reader with Wiegand interface
-
4 AW240 cable
122AW002400
5 AW285 cable
122AW002850
6 Power supply 12V 1.5A
122AA100015
7 DC power cord
122AA100016
8 AC power cord
11480784.2
9 Junction box
122AA100006
Connection diagram of the handle with the reader in standalone mode
The handle 8-wire cable can be extended to a maximum length of 100m with selecting the appropriate cross-section of the wire. The maximum
allowed length of the reader cable is 3m.
+
or
or
or
1
2
3
4
5
9
7
8
6
Reader with
Wiegand
interface
Power supply
12VDC 1.5A
white
brown
green
yellow
grey
pink
blue
red
Unused wires must
be insulated.
4-pin socket
8-pin socket
AW240 cable
AW285 cable
white
brown
green
yellow