www.bkte.pl
AL200 swinghandle manual
4
2
Technical specifications
Handle data
Parameter
Value
Power supply voltage
Nominal 12V DC, allowed 10-24V DC, recommended power supply 12V DC ≥500mA.
If the handle powers an optional card reader, take into account the supply voltage and the current
consumption of the reader.
Quiescent current consumption
(not including optional card
reader)
110 mA at 10 V
90 mA at 12 V
60 mA at 24 V
Maximum current consumption
when opening/closing (200ms)
(not including optional card
reader)
300 mA at 10 V
250 mA at 12 V
150 mA at 24 V
Connectors
Type 53047-0810 8-pin connector, type 53047-0410 4-pin connector
Dimensions
177 x 37 x 51mm (H x W x D)
Weight
150g
Packaging dimensions
200 x 100 x 50 mm (W x D x H)
Packaging weight
200g
Operating conditions
Temperature: 0°C - 50°C, Humidity: 0% - 90% RH (without condensation)
Storage conditions
Temperature: -10°C - 60°C, Humidity: 0% - 95% RH (without condensation)
Enclosure material
Glass fibre reinforced polyamide PA6 GF30
Enclosure colour
Black, RAL 9005
Enclosure protection degree
IP30
Compliance with directives
2014/30/EU (EMC), 2011/65/EU (RoHS)
Compliance with standards
EN 61000-4-2:2009 Electrostatic discharge immunity test.
EN 61000-4-3:2007 Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4:2012 Electrical fast transient/burst immunity test.
EN 61000-4-5:2014 Surge immunity test.
EN 61000-4-6:2014 Immunity to conducted disturbances, inducted by radio-frequency fields.
EN 61000-6-4:2007/A1:2011 Electromagnetic compatibility (EMC) – Emission standard for industrial
environments.
Part number
122AL002000
Optional AR221 reader data
Parameter
Value
Power supply voltage
Nominal 12V DC, allowed 6,5-30 V DC
Maximum current consumption
50mA
Working frequency
125kHz
Reading distance
4cm
Cable length
0.4m
Data for optional reader of any type
Parameter
Value
Reader type
The handle supports any type of reader that has a Wiegand interface. It can be a 125kHz card reader
(Unique, HID Prox etc.), 13.56MHz cards (Mifare, HID iClass etc.), biometric reader, keyboard reader etc.
Supported communication
interfaces
Wiegand 26bit - 66bit
Reader supply voltage
The handle has a connector for powering the reader. The reader is powered by the same voltage as the
handle, so it is necessary to select the value of the supply voltage appropriate for the handle and also for
the optional reader.
Maximum allowable power
consumption by the reader
200mA
