bk ultrasound Flex Focus 1202, Руководство пользователя

Страница: 45 / 66

Flex Focus 1202 User Guide (BB1756-Q) Adjusting the System 45
Chapter 3
Adjusting the System
Calibrating the Touch Screen Alignment
If you have trouble activating the correct screen control when you tap it, you may
need to recalibrate the alignment. This is simple to do.
To align the touch screen:
1
Click the Keyboard tab.
2
Click Alt , then C .
3
Follow the directions on the screen. (You will have to tap each cross that appears
and then confirm the process at the end.)
NOTE:
The tap is registered when you remove your finger from the screen, so don’t
hold your finger down and try to press hard if you think nothing is happening.
The touch screen is recalibrated.
Adjusting the Touch Screen
Viewing the image and other information on the monitor can be affected by lighting
in the room. To avoid glare, you can tilt the monitor from its upright position (see
Getting Started with Flex Focus ).
Hold the top of the monitor and the bottom of the monitor and push backward or
forward for easy adjustment. The range for tilting the monitor is approximately 15°.
If you adjust the angle of the screen, you should check the calibration of the touch
screen to ensure accuracy.