bk ultrasound Flex Focus 1202, Руководство пользователя

Страница: 25 / 66

Flex Focus 1202 User Guide (BB1756-Q) Safety Information 25
Follow the connection instructions in the manufacturer’s user guide for the
lithotriptor system. The connections must follow the guidelines given in EN 60601–
1–1 [7]
(Safety requirements for medical electrical systems) .
EMC Requirements
To fulfill EMC requirements, cables attached to the system must be shielded and no
longer than 5 m.
Table 2-5. List of cables used in testing for EMC compliance
Do not attach transducers and other accessories unless the user guide for the
transducer or accessory states that it can be used with this system. Attaching other
equipment may cause an increase in electromagnetic emissions or may cause the
system to be more sensitive to electromagnetic interference.
Isolation of DICOM Network
The system must not be galvanically connected to a computer network (DICOM
®
)
that has not been isolated. If the network is not isolated, the system must be
connected via a network isolator DP0925.
Wireless Network (Wi-Fi)
The system can be connected to a wireless network for printing and archiving data.
This requires the optional wireless license for the system, and a Wi-Fi adapter that is
supplied by BK Medical when you buy this option. The Wi-Fi adapter is inserted into
one of the USB connectors located in the neck of the system (see Fig 2-3 on page 21).
Connector name Cable type Type and length
DVI-I Dual link Shielded, 5 m
S-video/composite In S-video Shielded, 5 m
S-video/composite Out S-video Shielded, 5 m
Audio In Stereo, 3.5 mm jack Shielded, 5 m
Audio Out Stereo, 3.5 mm jack Shielded, 5 m
USB 1 USB, 2.0 Shielded, 5 m
USB 2 USB, 2.0 Shielded, 5 m
USB 3 USB, 2.0 Shielded, 5 m
USB 4 USB, 2.0 Shielded, 5 m
FW400 FireWire Shielded, 5 m
10/100/1000 Ethernet Network, CAT6E Shielded, 5 m
HistoScanning/Research
Interface MDR-26 Shielded, 3 m