bk ultrasound E13C2, Руководство пользователя

Страница: 6 / 14

6 June 2018 E13C2 User Guide (16-01484-EN-01)
Service and Repair
Caring for the Transducer
The transducer may be damaged during use or reprocessing, so it must be checked
before use for cracks or irregularities in the surface, following the procedure in
Care
and Cleaning . It should also be checked thoroughly once a month following the
same procedure.
Reprocessing
To ensure the best results when using BK equipment, it is important to maintain a
strict cleaning routine.
Complete details and procedures can be found in Care and Cleaning that
accompanies this user guide.
A list of reprocessing methods that the transducer can withstand are listed in the
Product Data Sheet .
Sterile covers are available. See the Product Data Sheet for more information.
WARNING GS-w2
If at any time the system malfunctions, or the image is severely distorted or degraded, or you
suspect in any way that the system is not functioning correctly:
•
Remove all transducers from contact with the patient.
•
Turn off the system. Unplug the system from the wall and make sure it cannot be used
until it has been checked.
•
Do not try to repair the system yourself.
•
Contact your BK service representative or hospital technician.
WARNING AO-w1
To avoid tissue damage, always keep the exposure level (the acoustic output level and the
exposure time) as low as possible.
WARNING SR-w1
Service and repair of BK electromedical equipment must be carried out only by the
manufacturer or its authorized representatives. BK Medical reserves the right to disclaim all
responsibility, including but not limited to responsibility for the operating safety, reliability
and performance of equipment serviced or repaired by other parties. After service or repairs
have been carried out, a qualified electrician or hospital technician should verify the safety
of all equipment.