bk ultrasound bk3500, Руководство пользователя

Страница: 38 / 64

38 Chapter 3 April 2017 bk3500 User Guide (16-01410-EN-04)
Table 3-4. List of cables used in testing for EMC compliance
Do not attach transducers and other accessories unless the user guide for the
transducer or accessory states that it can be used with this system. Attaching other
equipment may cause an increase in electromagnetic emissions or may cause the
system to be more sensitive to electromagnetic interference.
Isolation of DICOM Network
The system must not be galvanically connected to a computer network (DICOM
®
)
that has not been isolated. If the network is not isolated, the system must be
connected via a network isolator DP0925 .
Wireless Networks
The system can be connected to a wireless network for printing and archiving data.
A Wi-Fi dongle and a 30 cm USB 3.0 extender cable are supplied with the system.
Connect the dongle to the extender cable and insert into one of the USB 3.0
connectors (see Fig 3-3 on page 30).
Connecting to a Wireless Network
You must establish a secure wireless network at your hospital, clinic or institution,
including a password for the network, before you can use the system’s Wi-Fi for
printing and archiving.
For setting up a wireless network, see the bk3500 Advanced User Guide .
Connector Cable
DVI-I DVI-D Dual link Shielded 7.6 m
Composite Out Composite Video RCA Shielded 7.6 m
S-video Out S-video 7.6 m
Audio In Audio Stereo, 3.5 mm plug, Shielded 5 m
Audio Out Audio Stereo, 3.5 mm plug, Shielded 5 m
10/100/1000 Ethernet Ethernet CAT6 5 m
Caution Wifi-c1
The network must be set up correctly so that data is sent to the correct location. Otherwise
data can be lost or accessed by unauthorized people.
Caution Wifi-c2
A safe encrypted protocol for data transmission, approved by the hospital, must be used.
This is to prevent unauthorized people from getting access to the data.