BK TECHNOLOGIES BKR5000 Скачать руководство пользователя страница 55

Страница: 55 / 71

BKR5000 Portable Radio User’s Manual

- 51 -

Surveillance Mode [SURV]

Conventional and Trunking Channels

When Surveillance Mode is on, all audible indicators (beeps etc.) and

lighting functions (LEDs and Display) are disabled.
Surveillance Mode can a switch, button or as a menu list item.

System Test

Conventional and Trunking Channels

The BKR5000 portable offers a variety of system tests when connected

to the appropriate test equipment. Select the appropriate test and follow

the onscreen prompts.

Transmit Digital [TXAD]

Conventional Mixed-Mode Transmit Channels

When Transmit Digital is on, channels programmed for mixed-mode

transmit will transmit in digital mode. When off, mixed-mode channels

transmit in analog mode.
When transmitting in digital mode the display shows ‘D’ behind the TX

indicator. In analog transmit, ‘A” will follow the indicator.
Transmit Digital selection can be assigned as a button, switch or menu

list item.
When assigned as a button function, the “TXAD” button will be

highlighted when in the Transmit Digital mode.

Transmit Power [PWR]

Conventional and Trunking Channels

Transmit Power can be selected between the programmed high and

low settings. The power output of the settings depend on radio options,

model and editor settings.
When operating in the high power mode, “H” will be displayed on the

top line of the LCD. In low power mode, “L” is displayed.
Power selection can be assigned as a button, switch or menu list item.

Two-Tone Select [TONE]

Conventional Analog Channels

Allows the user to select from their two-tone list (programmed with the

PC Radio Editor). Selecting an item will send the two-tone signal.

Содержание BKR5000








































































Результаты поиска

Содержание BKR5000

Отзывы:

Похожие инструкции для BKR5000

Бренды по названию

Популярные бренды

BK TECHNOLOGIES BKR5000, Руководство пользователя

Результаты поиска

Содержание BKR5000

Отзывы:

Похожие инструкции для BKR5000

Бренды по названию

Популярные бренды