BK TECHNOLOGIES BKR5000 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 71

background image

BKR5000 Portable Radio User’s Manual

- 43 -

Radio Inhibit/Enable [INH]/[UNINH]

Conventional Digital Channels

With “Inhibit” is assigned to a button or menu function, a BKR5000

Radio can temporarily disable other BKR5000 radios using the targeted

radio’s unit ID number.
The disabled radio can only be re-enabled by sending an “Unhibit”

command.
NOTE: Inhibited radios cannot be read with the PC Radio Editor.

Sending a command

To initiate an inhibit/uninhibit message press the programmed button or

select from the menu.
Use the keypad to enter the User or Administrator password.
Press “ENTER” to open the menu.

Select Target Radio

Last Call

Select “Last Call” to send the message to same radio you last sent an

inhibit or uninhbit message. Press “SEND” to send the message.

Call List

Selecting “Call List” opens a list aliases for the pre-programmed Unit IDs.

Select the desired target radio and press “SEND” to send the message.

Unit ID

Select “Unit ID” to enter the P25 ID of the target radio.

Use the keypad to enter the ID and press “SEND” to send the message.

Message Acknowledgement

When the message has been received by the targeted radio, an alert

tone will sound and the acknowledgment message will be displayed.
Press “OK” or wait for three seconds to return to normal radio operation.
If the targeted radio is unavailable, an alert tone will sound and the failed

acknowledgement message will be displayed.
Press “RTRY” to resend the message.
Press “OK” or wait for three seconds to return to normal radio operation.

«
...
45
46
47
48
49
...
»

Содержание BKR5000








































































Отзывы:

Нет отзывов

Похожие инструкции для BKR5000

Бренд: Navman Страницы: 52

Бренд: Ibiza sound Страницы: 28

Бренд: Generac Power Systems Страницы: 36

Бренд: Radio Shack Страницы: 48

Бренд: OK. Страницы: 73

Бренд: ZIPPER MASCHINEN Страницы: 42

Бренд: auna multimedia Страницы: 24

Бренд: Fresh 'N Rebel Страницы: 34

Бренд: Memorex Страницы: 2

Бренд: TechniSat Страницы: 112

Бренд: Generac Power Systems Страницы: 16

Бренд: Rato Страницы: 47

Бренд: Matsui Страницы: 7

OTC AC/MIG/201 CPDACA-200

Бренд: Daihen Страницы: 48

Бренд: Baofeng Страницы: 25

Бренд: Curtis Страницы: 6

Бренд: Sanyo Страницы: 6

Бренд: Harman Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды