BK TECHNOLOGIES BKR5000 Скачать руководство пользователя страница 41

Страница: 41 / 71

BKR5000 Portable Radio User’s Manual

- 37 -

Messaging

Digital Conventional P25 channels can be programmed to send and

receive text messages and radio status messages.
Text messages can be selected from a pre-programmed list or manually

entered using the radio keypad.
Status messages are pre-programmed only.

Text Messaging [TXT]

Conventional Digital Channels

Text Messaging needs to be configured in the PC Radio Editor for

both tx and rx radios. Message types include predefined messages,

manually entered messages or locally stored messages.

Predefined messages -

Predefined messages are programmed

into the radio memory using the PC Radio Editor.

Manually Entered Messages

- Text messages can be manually

entered via the radio’s keypad.

Locally Stored Messages -

Up to five manually entered messages

can be stored in individual radios.

Sending a Message

To initiate a text message press the “TXT” button or select “Text

Message” from the menu.
Select “Send” from the menu and press “ENTER”.

Select Message Type

From the “Select Entry Type” menu, choose the type of message to

send and press “ENTER”.

Predefined List or Manual Entry List

When “Predefined List” or “Manual Entry List” is selected, a list of

available messages is displayed.
Select the message to be sent and press “ENTER”.

NOTE: When sending a predefined message the message ID

is transmitted. The receiving radio will display the message

programmed with the corresponding ID. If the receiving radio has no

programmed message with the transmitted ID, “Text Message X” is

displayed, where “X” is the received ID number.

Содержание BKR5000








































































Результаты поиска

Содержание BKR5000

Отзывы:

Похожие инструкции для BKR5000

Бренды по названию

Популярные бренды

BK TECHNOLOGIES BKR5000, Руководство пользователя

Результаты поиска

Содержание BKR5000

Отзывы:

Похожие инструкции для BKR5000

Бренды по названию

Популярные бренды