BK Radio P150, Руководство по обслуживанию

Страница: 26 / 264

BK Radio Page 2-11
installation and programming
transmit code Guard
T x G u a r d
1 0 0 . 0
eSc clr ent
T x G u a r d
# f o r C D C S S
0 0 0 . 0
eSc clr ent
T x G u a r d
# f o r C T C S S
D 0 0 0 -
eSc
+/-
clr ent
T x G u a r d
T x N A C
T G I D
ESC ▲ ▼ ENT
This programs the channels Default Code Guard value.
1. With ‘Tx Guard’ highlighted, press the ‘ENT’ button.
2. Press the ‘CLR’ button to clear the currently programmed tone.
3. To enter CTCSS tones use the keypad to enter the tone in Hertz.
(67.0 - 255 Hz)
To enter CDCSS tones press the # key then enter the three digit code.
(000 - 777) Use the +/- button to invert the CDCSS tone.
4. Press the ‘ENT’ button to set the tone.
5. Press the ‘ESC’ button to return to the Channel Programming menu.
NOTE: If the channel being programmed is currently using a Code Guard from
the Picklist, a “User Picklist Active” notification appear on the display.
transmit network access code
T X N A C
U N A C E n a b l e d
U N A C 3 2
eSc clr ent
T X N A C
$ 2 9 3
eSc clr ent
T x G u a r d
T x N A C
T G I D
ESC ▲ ▼ ENT
eSc Bck clr ent
T X N A C
$
T X N A C
U N A C E n a b l e d
U N A C
eSc clr ent
Channel Specific
User Selected
This programs the channels Default NAC value.
1. With ‘Tx NAC’ highlighted, press the ‘ENT’ button.
If the channel you are programming is assigned a specific, non-selectable
NAC the assigned value will be displayed.
If the channel is programmed for User Selectable NACs ‘UNAC Enabled’
will be displayed along with the currently selected picklist number.
2. Press the ‘CLR’ button to clear the currently programmed NAC.
Press the ‘#’ key To toggle between “Channel Specific” and “User
Selected” options.
3. NACs are programmed as three digit hexadecimal numbers. (000 - FFF)
Use the keypad to select the desired digits.
Use the 2 key to select A, B or C and the 3 key to select D, E or F.
Press the ‘BCK’ button to move to the previous character.
4. Press the ‘ENT’ button to set the NAC.
NOTE: If the channel being programmed is currently using a NAC from the
Picklist, a “User Picklist Active” notification appear on the display.