81
*RCL <NR1> Recall setting from memory
*RST
Reset
*SAV <NR1> Save setting to memory
4.5
SCPI Common Subsystem
Subsystem commands are specific to functions. They can be a single
command or a group of commands. The groups are comprised of
commands that extend one or more levels below the root. The
subsystem commands are arranged alphabetically according to the
function they perform.
Command
Description
CONFig
Configuration subsystem
:LIMit
:CURRent
:MAX <NRf | ?>
Set or return maximum current
setting value
:MIN <NRf | ?>
Set or return minimum current
setting value
:VOLTage
:MAX <NRf | ? >
Set or return maximum voltage
setting value
:MIN <NRf | ?>
Set or return minimum voltage
setting value
:EXTernal
:MODE < OFF/0,
AMODE/1,
BMODE/2 | ?>
Set or return external control state
:CURRent
:MODE < FRONt/0,
Set or return current external control
