23
4.6
Buzzer On/Off
This option enables or disables the instrument beeper.
1.
From the
Config
menu, select
Buzzer
and press the
button.
2.
There are two options that can be selected by using the
keys or rotary knob:
3.
Select one of two options below, then press the
button:
OFF
– Beep is turned off.
ON
– Beep is turned on.
4.
To exit the menu at any time, press the
key twice.
4.7
Communication
Follow the instructions below to select and configure the remote interface.
RS232
1.
From the
Config
menu, select
RS-232
and press the
button. This will select the
RS-232 interface for remote communication.
2.
There are four options that can be selected by using the
keys or rotary knob:
3.
Use the
to select the Baud Rate
–
4800
,
9600
,
19200
,
38400
,
57600
or
115200
and press
button.
4.
Use the
keys to select the Parity
–
N
None,
O
Odd, or
E
Even and press the
button.
5.
Use the
to select the Control Flow –
Single
or
Mux
and press the
button.
6.
To exit the menu at any time, press the
key twice.
Factory default: 4800,8,N,1, Single
USB
1.
From the
Config
menu, select
USB
and press the
button. This will select the
USB interface for remote communication.
2.
To exit the menu at any time, press the
key twice.
