9
2
Getting Started
Before connecting and powering up the instrument, please review and go through the
instructions in this chapter.
2.1
Input Power and Fuse Requirements
The supply has a selectable AC input that accepts line voltage input within:
Voltage:
110 V (+/- 10 %) or 220 V (+/- 10 %)
Frequency:
47 Hz – 63 Hz
Before connecting to an AC outlet or external power source, be sure that the power switch is in
the OFF position and verify that the AC power cord, including the extension line, is compatible
with the rated voltage/current and that there is sufficient circuit capacity for the power supply.
Once verified, connect the cable firmly.
The included AC power cord is safety certified for this
instrument operating in rated range. To change a
cable or add an extension cable, be sure that it can
meet the required power ratings for this instrument.
Any misuse with wrong or unsafe cables will void the
warranty.
SHOCK HAZARD:
The power cord provides a chassis ground through a
third conductor. Verify that your power outlet is of the
three-conductor type with the correct pin connected
to earth ground.
