8
2
Getting Started
Before connecting and powering up the instrument, please review and go through the
instructions in this chapter.
2.1
Input Power and Fuse Requirements
Input Power
Before connecting to an AC outlet or external power source, be sure that the power switch is in
the OFF position and verify that the AC power cord, including the extension line, is compatible
with the rated voltage/current and that there is sufficient circuit capacity for the power supply.
Once verified, connect the cable firmly.
The included AC power cord is safety certified for this
instrument operating in rated range. To change a
cable or add an extension cable, be sure that it can
meet the required power ratings for this instrument.
Any misuse with wrong or unsafe cables will void the
warranty.
For Models 9115/B(-AT) and 9116/B
The supply has a universal AC input that accepts line voltage input within:
AC Input:
115 V (+/-10%) or 230 V (+/- 10 %)
Frequency:
47 Hz – 63 Hz
Do NOT plug the AC power cord into the wall socket
prior to connecting ALL three AC power wires to the
rear panel and securely mount the safety metal
housing over the input receptacle. Doing so may
create a shock hazard.
SHOCK HAZARD
The power cord provides a chassis ground through a
third conductor. Verify that your power outlet is of the
